Massoth eMotion Powercap Maxi
The new Powercap maxi replaces the former eMOTION Goldcap Buffer 8151501. The Powercap maxi supplies power to the digital decoder in case of track power interruptions. The maximum buffer time with 2 motors is up to 30 seconds. The size has been reduced by approximately 40%.
Availability: Temporary Out of Stock.
Manufacturer part number: 8151701
eMOTION Powercap maxi
The new Powercap maxi replaces the former eMOTION Goldcap Buffer 8151501. The size has been reduced by approximately 40%.
Buffer Time up to 30 seconds!
The eMOTION Powercap maxi bridges track power interruptions. The motor and all special functions of the decoder will be supplied with power during these interruptions. This makes locomotives pass switch frogs and track sections with corroded or contaminated tracks easily and without any speed change. The maximum buffer time is 30 seconds and depends on the total load, the driving speed, and the charge state.
Intelligent Technology & Suitable for most Decoders
The integrated intelligent circuits with the high capacity capacitors make the Powercap maxi suitable for all decoders with decoder + and decoder - inputs. (testet with: Massoth, LGB®, Lenz®, Zimo®)
Hook-Up with an eMOTION Loco Decoder
The Powercap maxi is particularly suited for the operation with the decoder of the eMOTION series. The red wire connects to Dekoder + and the black wire connects to Dekoder - The third wire (white) controls the charging function. This wire is connected to a function output of an eMOTION loco decoder. During programming and CV reading the charging function is automatically disabled to ensure proper programming and reading. Third party decoders and older decoders require a switch (provided) for this.
The performance data are:
- buffering time up to 30 seconds dependending on connected load)
- maximum drawing current 3 amps
- maximum charging current 400mAmps
- operating voltage 6-20V DC (max. 24V)
Dimensions LxBxH: 2 PCBs aprox. 41x12x35mm